BANDI

PRODUCT

  • HOME
  • PRODUCT
  • PROCESS GELIQUE

PROCESS

BANDI
GELIQUE SYSTEM

Application & Removal

STEP 1Pre-treatment for Gelique treatment

  1. 01. Trim the shape and length of nails with BANDI wood file
  2. 02. After soaking cuticles with BANDI Gelique Fresh, remove loose skin and arrange around cuticle using pusher and nipper.
  3. 03. Put BANDI Gelique Fresh Starter on nail wipe and rub it up ad down
TIP

If you want Gelique treatment to last more than 3 weeks, put small amount of BANDI prime bonder on brush,apply only the border of natural nail. Free edge is applied thoroughly to the edge.

STEP 2Applying Gelique Base Gel

  1. Base&Top GEL Treatment
  2. 01. Apply Base & Top gel to 1Coat natural nail. At this time, Fill the cuticle line full, and wrap the free edge thoroughly and apply thin.
  3. 02. 1 minute curing on UV lamp / 30 seconds curing on LED lamp.
TIP

When doing art or taking long time for coloring,Or if you want to fill it completely with full color, wipe the uncured gel with alcohol.

  1. V'2 VITA GEL Treatment
  2. 01. Apply Vita Gel to 1Coat natural nail.At this time, Fill the cuticle line full, and wrap the free edge thoroughly and apply thin.
  3. 02. 1 minute curing on UV lamp / 30 seconds curing on LED lamp.
TIP

Depending on the thickness and lamp condition, it can be cured for about 2 minutes.

CAUTION

Caution: Be careful not to get into your eyes. After the nutrient application, it is completely dried and then sleeps.

STEP 3Applying Gelique Color Gel

  1. 01. Take an appropriate amount of color gel and apply 1Coat thinly to cuticle line and free edge thoroughly.
  2. 02. 1 minute curing on UV lamp / 30 seconds curing on LED lamp./li>
  3. 03. Take an appropriate amount of color gel and apply 2Coat not to make lines.
  4. 04. 1 minute curing on UV lamp / 30 seconds curing on LED lamp.
TIP

If you want to keep your jelly beans for more than three weeks, apply a small amount of the Bandi Prime Bond to the brush and apply only the edges of the natural nail.
The free edge is carefully applied to the edges.

STEP 4Applying Gelique Top Gel

  1. 01. Apply Base & Top Gel on top of 2Coat of gel color. Fill the cuticle line full, and wrap the free edge thoroughly and apply thin.
  2. 02. 1 minute curing on UV lamp / 30 seconds curing on LED lamp.
  3. 03. Put BANDI Gelique Cleanser on nail wipe to clean the uncured gel and polish.
  4. 04. Nourishes around nails with botanical oil or oil comfort.

Gelique Off Step

  1. 01. Apply Gelique UV Gel Remover to cotton pad area of Gelique nail wrap..
  2. 02. Fold cotton pad of Gelique nail wrap to color side, then turn and roll to fix it using adhesive surface.
  3. 03. Wait for about 15 minutes.
  4. 04. Unfold nail wrap and remove the remaining color gel. At this time, use wood stick or pusher lightly.
  5. 05. Finish with sanding.
  6. 06. Apply moisturizing nutrient ample to nourish damaged nails when off.